Spill Wrangler 469-249-2716 Request a quote

Disposal and bioremediation

Spill Wrangler passes the paint filter test, EPA Method 9095B. How you dispose of it depends on what it absorbed.

It is not about the absorbent. It is about the liquid. Non hazardous spills such as water, milk and coolant go out as normal solid waste in every state. Hazardous spills must be handled as hazardous waste everywhere.

  1. Classify the waste

    • Decide whether the liquid in the used absorbent was hazardous or non hazardous, then follow the disposal rules for your area.
    • If the absorbent is heavily saturated, run a paint filter test for free liquids. The method is used to determine compliance with 40 CFR 264.314 and 265.314.
    • Review your local disposal regulations.
  2. Clean up

    • Sweep up the used absorbent with a broom.
    • Place it in the right waste container.
    • Record how it was disposed of.
  3. Dispose

    • Non hazardous material can go to an approved landfill.
    • Absorbent that holds free liquid oil must be handled under used oil management rules.
    • Energy recovery by incineration reduces waste volume.
    • Reuse the absorbent until it is fully saturated.

Used oil absorbent, by state

Most states
Normal solid waste disposal when the material passes the paint filter test, holds no listed hazardous waste, shows no free flowing oil and the landfill operator accepts it. This covers Texas, Wisconsin, Michigan, Pennsylvania, Illinois, Ohio, Indiana, Florida, Georgia, Colorado, Missouri and most other states that follow the federal RCRA framework.
California
Oil absorbents are managed as hazardous waste. Used oil is a state designated hazardous waste.
Arizona
Landfills will not accept it. It must be recycled or managed as hazardous waste.
New York
Oily absorbents are treated as hazardous waste unless recycled.

True in every state

  1. Determine whether the absorbed liquid is a hazardous waste.
  2. If it is hazardous, handle it as hazardous waste.
  3. If it is not, make sure there are no free liquids.
  4. Confirm the landfill accepts oil contaminated waste.
  5. Check your own state rules. They can be stricter.

How bioremediation works

Bioremediation

Bioremediation uses microbes to break down oil based liquids and treat contaminated soil or water. Each bag of Spill Wrangler carries microbes that speed up the breakdown of hydrocarbons, helped by high levels of nitrogen, sulfur and phosphorus.

The microbes convert the hydrocarbons into water and carbon dioxide with no harmful byproducts. This can clean a site without costly excavation and hazardous waste hauling.

Bioremediation depends on many factors, and the right approach depends on your situation. Contact us and we will help you work out what fits.

How bioremediation works

  1. MicrobesOil particlesContaminated water

    Microbes go in

    Microbes are added to the oil contaminated water.

  2. MicrobesOil particle

    Microbes surround the oil

    They gather on the surface of each oil particle.

  3. OilMicrobeEnzymes

    Enzymes break it down

    The microbes release enzymes that break the hydrocarbons apart.

What is leftWater, H₂OCarbon dioxide, CO₂